国产激情久久久久久一级A片老师,成人18岁在线观看,国产精品久久久久久久日韩 ,91好吊色国产欧美日韩在线

Repair and maintenance of AC fan impeller

Repair and maintenance of AC fan impeller
Nowadays, AC fans are useful in many industries. How to repair and maintain AC fan impellers to improve the service life of AC fan impellers? Here AC fan manufacturer-Ruiapple provides some suggestions for everyone.
Maintenance of bearing department
 
　　 Frequently check the supply of lubricating oil in the bearing. If there is oil leakage in the box, you can tighten the bolts of the end cover a bit. If this is not enough, you may have to replace it with a new packing.
 
　　Maintenance of the casing and intake chamber
 
　　 In addition to regularly checking the outer shell and inner shell for serious abrasion and removing dust accumulation, other special maintenance is not required for these parts.
 
　　 Regularly check whether all the fastening bolts are tight. For fans with compression bolts, press the butterfly springs on the feet to the installation height specified in the drawings.
 
The lubricating oil of the bearing should be replaced at least once in six months during normal use. For the first use, it should be carried out after about 200 hours of operation. The second oil change should be carried out within 1 to 2 months. The lubricating oil should be checked once a week. If the lubricating oil has not deteriorated, the oil change can be extended to once every 2 to 4 months. When changing, you must use the specified brand of lubricating oil, and the old oil in the oil tank must be thoroughly drained and cleaned before filling with new oil.
 
Repair and maintenance of impeller
　　In the initial stage of impeller operation and all regular inspections, whenever there is a chance, the impeller must be inspected for cracks, wear, dust and other defects.
 
The impeller should be kept in a clean state, and the dust and debris on the impeller should be brushed off regularly. Because the impeller runs for a long time, the dust may not uniformly adhere to the impeller. Prolonged adhesion will damage the balance of the impeller and cause the rotor to vibrate.
 
　 After the impeller has been repaired, it needs to be dynamically balanced. If possible, you can use a convenient test balancer to balance it on site. 　Before performing dynamic balancing, you must check whether all the tightening bolts are tight. Because the impeller has been operating in an unbalanced state for some time, these bolts may have been loosened.
　
　　 In summary, the maintenance of the AC fan impeller is not only before use, but also certain inspection and maintenance after use to confirm that all factors that may cause damage to the AC fan impeller are removed. We can properly maintain and repair the AC fan impeller in the normal production process according to our actual situation to extend the service life.
 
Shenzhen Ruiapple Electronics Co., Ltd. is a professional fan manufacturer with 20 years of R&D, production and sales experience. Main business: cooling fan, DC fan, AC fan, silent fan, centrifugal fan, blower and other full range of heat dissipation and ventilation products as an integrity enterprise, the series of cooling fan products have obtained UL, CUL, CE, CCC, ROHS, etc. International Certification.
 
Shenzhen Ruiapple Electronics Co., Ltd. was established in 2000. For 20 years, it has focused on R&D, manufacturing, and sales of DC AXIAL FAN, AC AXIAL FAN, CENTRIFUGAL FAN, and blower ( BLOWER), AC to DC fan (EC FAN), DC motor (DC MOTOR), AC to DC (EC MOTOR) motor and other full series of cooling and ventilation products as a whole series of integrity enterprises.